CGI Construction in Irvine, CA

CGI Construction in Irvine, CA | Square One Builders

We’re Square One Builders, and we install and service CGI cabinet lines across Irvine as an independent contractor, not a manufacturer-authorized dealer. The short version: we handle CGI Ready-to-Assemble, Euro-style, thermofoil, and face-frame cabinet work in Irvine’s tract villages, and we read each community’s architectural guidelines before we order a single box. That review step matters here more than in any neighboring city. Call (877) 688-9930 for a free estimate on any CGI job, from a single cabinet swap to a full kitchen remodel.

Call (877) 688-9930

Why Irvine Residents Choose Us for CGI Service

Most of Irvine’s housing stock was built in big tract waves, which means the original cabinetry in Woodbridge, University Park, and Northwood is now hitting the same age-related failure points at roughly the same time. We’ve spent years field-fitting CGI cabinets into those 1970s and 1980s kitchens, and into attached townhomes where shared walls and slab settlement change how cabinets sit and swing. We know which CGI lines hold up in Irvine’s dry heat and which door materials start peeling after a few west-facing summers, and we also offer CGI repair in Santa Ana for homes facing similar conditions. Brent Calloway, our owner and general contractor, grew up just off Bolsa Avenue in Midway City and has worked on Orange County homes for nearly three decades. He’d tell you the same thing we tell every Irvine homeowner: the cabinet is only as good as the wall behind it. We check the wall, the slab, and the plumbing before we quote a single door.

Common CGI Construction Problems We Solve in Irvine

• Thermofoil and laminate door delamination. CGI thermofoil and laminate door faces peel along the bottom edge and corners after years of dry heat cycling through west-facing Irvine kitchen windows. The Santa Ana winds don’t help. We reface the doors with a shaker or slab profile that won’t separate the same way.
• Particleboard and MDF box swelling at sink bases. In Irvine’s 1970s and 1980s village homes, the original plumbing is now seeping, and that slow moisture wicks right into CGI box construction. We open the cabinet, find the swollen MDF, and rebuild the base with plywood RTA stock that won’t crumble the next time.
• Racked and out-of-square boxes from slab settlement. Irvine stucco tract homes settle, and the slabs shift. The cabinet boxes rack, doors drag, and hinges pull loose. We don’t just swap doors; we reset the boxes square to the settled slab so the alignment actually holds.
• RTA cam-lock and dowel joint loosening. Attached townhomes and condos in Irvine experience seasonal humidity swings and shared-wall expansion, which loosens cam-locks and dowels in RTA cabinet lines. We tighten and reinforce the joints with proper fasteners and glue blocks, not just a hex key.
• Cabinet doors dragging after countertop replacement. We see this a lot: a homeowner drops a heavy quartz or granite top on original CGI boxes, and suddenly every door drags. The boxes were never shimmed for the extra weight. We shim, square, and reset before the countertop goes back on.

CGI Service in Irvine: What Local Conditions Mean for Your Equipment

Irvine isn’t a typical Orange County suburb when it comes to construction work. Nearly every village here was developed under Irvine Company-era architectural guidelines, and each one has an HOA architectural review board that can hold up a cabinet swap if it changes an exterior-visible element like a window over the sink or a new vent hood penetration. That review step is essentially absent in neighboring cities. For a Tustin CGI service or any local job, it means we plan the architectural submission at the same time we spec the cabinet boxes. You don’t want to order a full kitchen of doors and find out the Woodbridge or Northwood board wants a different window configuration first. We’ve handled these boards enough to know which questions they’ll ask before they ask them, and that keeps your project from stalling mid-install.

CGI Models & Products We Service in Irvine

We work across the CGI range: Ready-to-Assemble all-plywood shaker cabinets, Euro-style flat-slab lines, thermofoil and laminate door styles, and solid wood face-frame semi-custom cabinets. Where a CGI line is still supported, we order OEM doors, hinges, and drawer glides. When OEM parts are discontinued or priced unreasonably, we move to quality aftermarket soft-close hardware and plywood stock that matches the existing profile. We keep common CGI door profiles and hinge styles on hand for fast turnarounds in Irvine, because waiting three weeks for a single door is a lousy way to live. For more on our broader CGI work, see our CGI sales & service page.

CGI Service Pricing in Irvine

FAQs – CGI Construction in Irvine

Do I need Woodbridge or Northwood HOA architectural approval before replacing CGI cabinets?
Yes, if the work changes an exterior-visible element like a window or vent hood penetration. A straight cabinet swap that stays inside the same footprint usually doesn’t need review, but we verify with your specific village board before ordering anything. Call (877) 688-9930 and we’ll help you figure out exactly what your HOA requires.

My CGI thermofoil doors are peeling – repair or replace?
If the peeling is along the bottom edge and the underlying MDF is still sound, refacing with a shaker or slab door usually costs far less than replacing the whole cabinet run. If the MDF has swollen or the box is water-damaged, replacement is the honest answer. We’ll tell you which one applies to your kitchen.

Why do my CGI cabinets rack and drag in my Great Park townhome?
Great Park townhomes are still settling, often with slab movement and shared-wall expansion. The cabinet boxes don’t fail; they go out of square. We re-shim and reset the boxes to the settled slab, then adjust the doors so they close clean again.

Can I put quartz or granite on my existing CGI cabinet boxes?
Usually yes, if the boxes are plywood and still square. We shim and reinforce the base before the top goes on. If the boxes are particleboard or MDF and have already absorbed moisture, we replace them first. The stone is only as stable as what’s under it.

How do Irvine’s 1970s villages differ from the newer Great Park tracts for a CGI kitchen job?
The 1970s villages like Woodbridge and University Park are hitting full kitchen remodel and repipe age at the same time, so we often rebuild water-damaged boxes and reface what’s still sound. Great Park homes are still under builder warranty in many cases, which means warranty terms and architectural control shape the scope differently. The work is the same craft; the constraints are different.

Service Areas Near Irvine

We serve Irvine and the surrounding communities including our full Irvine service area, plus CGI service in La Habra and CGI service in Brea. If you’re in northern Orange County or the Inland Empire and need CGI cabinet work, call us and we’ll let you know if we cover your neighborhood.

Book Your CGI Service in Irvine Today

Start from square one, build it right. If your CGI cabinets are delaminating, racked, or water-damaged, call (877) 688-9930 for a free estimate. We’ll tell you what needs fixing, what can wait, and what it’ll cost.

Written by Brent Calloway, Owner & General Contractor at Square One Builders, serving Irvine since 2008.