Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Oak Hills, CA | Square One Builders
We provide independent CGI construction service across Oak Hills, from full kitchen remodels using CGI cabinetry to roof replacements and additions that carry the CGI product line. We also offer CGI repair in Hesperia for homeowners in neighboring communities. The difference here is local: most Oak Hills projects sit on 1-acre-plus parcels on private wells and septic, which means any structural or square-footage change runs through San Bernardino County review before a cabinet box is even ordered. We plan for that from day one. Call (877) 688-9930 to talk through your project with Brent Calloway and our team.

Our CGI sales & service work covers the full product range, from RTA kitchen cabinets to semi-custom series. If you’re in the 92344 ZIP or anywhere in the Oak Hills service area, we’re the crew that knows how CGI products hold up to high-desert conditions.
Why Oak Hills Residents Choose Us for CGI Service
Lots of contractors can hang cabinets. Few have spent years watching how CGI boxes and hinges behave when a garage hits 100°F in August and drops near freezing the same night. We have. Oak Hills’ thermal swings are harder on cabinet joinery than anything you’ll find down the hill, and most of the failure we see comes from hardware and fasteners that were never sized for that kind of movement.
Brent Calloway grew up in the Midway City pocket off Bolsa Avenue and spent decades on job sites throughout Southern California before Square One Builders started serving the High Desert. He learned framing, concrete, and finish work through the Construction Technology program at Golden West College, then years of hauling material and reading blueprints in parking lots. That background matters when you’re asking a contractor to spec CGI cabinets, a tile roof, and a stucco addition that all have to survive the same wind event. Homeowners seeking CGI service in Victorville face similar High Desert challenges. We use OEM CGI hinges, drawer glides, and touch-up kits to keep warranty coverage intact, but we don’t hesitate to upgrade to aftermarket soft-close dampers and reinforcement brackets where CGI’s stock hardware falls short for desert cycling.
We’re an independent construction firm. We’re not manufacturer-affiliated or authorized by CGI. That means our recommendations come from field results, not a sales sheet.
Styles & brands we work with







Common CGI Construction Problems We Solve in Oak Hills
- Cabinet box separation from thermal cycling. Oak Hills day-night swings routinely exceed 40 degrees, and unheated garages or poorly insulated additions make it worse. We regularly see CGI frameless cabinet boxes where corner joints have pulled apart after a few summers. We reface and rehang when the box is structurally sound; when joint failure has compromised the box, replacement is the honest call.
- Loose hinges and drawer glides. Seasonal expansion and contraction on large-lot Oak Hills homes, many of them owner-built or self-contracted, loosens stock CGI hardware faster than valve conditions would suggest. We replace with aftermarket soft-close hardware rated for wider temperature tolerances.
- Hairline stucco cracks on CGI-backed additions. High-desert temperature swings make stucco and exterior trim move. If the lath and control joints weren’t detailed for movement, hairline cracks invite moisture intrusion. We tie new work into existing stucco with movement joints that actually move.
- Roof tie-in failures under high wind. Patio covers and shop extensions that use CGI-supplied trusses often fail at fasteners because standard wind uplift ratings for valley areas are insufficient for Oak Hills exposures. We upgrade fastener patterns and uplift hardware before the next big blow.
- Countertop seam separation over slabs. CGI quartz and granite countertops separate when installed over concrete slabs that lack crack-isolation membrane. Oak Hills has expansive soils and plenty of owner-built slabs. We add membrane before the stone goes down.
CGI Service in Oak Hills: What Local Conditions Mean for Your Equipment
Oak Hills is unincorporated, and most parcels are 1-acre-plus. That single fact changes everything about a CGI kitchen or bath remodel. Any project that adds square footage or an attached structure isn’t a simple over-the-counter city permit. It’s San Bernardino County building review, including separate well and septic clearances, and that adds weeks to the schedule before cabinets are even ordered. We’ve done this enough times to know exactly what the county will ask for: site plans showing well and septic setbacks, structural calcs for wind exposure, and a clear scope of work separating the existing pad from the addition. If you’re planning a CGI kitchen remodel with an island or a bump-out in Oak Hills, start the permit conversation early. We handle that paperwork as part of our scope, so you don’t have to navigate county submittals alone.
On a 2-acre parcel off Coyote Road, we remodeled a 1990s custom home’s kitchen where the original CGI frameless cabinets had separated at the box corners from years of thermal cycling. We’ve seen the same pattern in CGI in Phelan installations exposed to identical desert temperature swings. We replaced the affected boxes with new CGI RTA units, upgraded to aftermarket soft-close hinges rated for wider temperature tolerances, and added a crack-isolation membrane under the quartz countertop. Then we tied the new island circuit into the county-permitted electrical panel. The finished kitchen has held tight through two summers of 100°F swings.
CGI Models & Products We Service in Oak Hills
We work with the full CGI cabinet and bath lineup that shows up in Oak Hills homes: the Ready-to-Assemble (RTA) Kitchen Cabinets, the All-Wood Bath Vanity Collection, European Frameless Cabinetry, and the Semi-Custom Kitchen Series. What we stock locally and what we order depends on your job. OEM CGI hinges, drawer glides, and touch-up kits stay on hand for fast Oak Hills turnaround. Where CGI’s stock hardware is undersized for desert cycling, we specify aftermarket dampers and reinforcement brackets before install. That’s the independent advantage: we pick the right part for the conditions, not the part CGI shipped with the box.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Oak Hills
Oak Hills project costs depend on scope, site access on large lots, and whether county permitting triggers additional clearances. Here’s what we tell homeowners to budget for the most common CGI-related scopes:

| Service | Typical Range |
|---|---|
| Kitchen Remodel with CGI Cabinets | $14,000 – $45,000 |
| Cabinet Installation & Refacing | $4,000 – $13,000 |
| Countertop Installation (CGI quartz or granite) | $2,000 – $6,500 |
| Roof Replacement (tile or composite, wind-rated) | $8,000 – $20,000 |
What drives cost in Oak Hills specifically: whether your parcel needs grading or trenching for utility tie-ins, what the county requires for septic and well setbacks, and whether we’re refacing existing CGI boxes or replacing them. Free estimates include a line-item scope and an honest read on what needs county review. Call (877) 688-9930 for an exact quote on your project.
Serving Oak Hills, CA — Our Local Coverage Area
We’re based in the Oak Hills area and know this community well. Our service area extends to nearby communities, including CGI in Mountain View Acres. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Oak Hills
If the remodel changes the kitchen footprint, adds an island with power, or involves any structural modification, yes – San Bernardino County will require building review, including well and septic clearances on most Oak Hills parcels. A cabinet swap within the existing footprint may not trigger structural review, but any electrical, plumbing, or square-footage change will. We pull permits and manage inspections as part of our scope. Call (877) 688-9930 and we’ll tell you exactly what your project triggers before you spend a dollar.
CGI cabinets hold up reasonably well when installed with hardware and joinery that account for thermal movement, but stock CGI hinges and drawer glides are often undersized for Oak Hills’ day-night swings. We upgrade to aftermarket soft-close hardware rated for wider tolerances and reinforce box corners on existing cabinets where needed. If you’re buying new, we spec the right hardware from day one.
Yes. A vanity swap within an existing bathroom footprint is usually straightforward and rarely triggers septic review. If you’re adding a bathroom or relocating plumbing, San Bernardino County will require septic clearance and possibly an expansion assessment depending on tank and leach field capacity. We coordinate that with the county so the vanity install doesn’t stall.
For Oak Hills exposure, we recommend Class A fire-rated tile or composite products with wind uplift ratings sized for the High Desert, not valley conditions. CGI-supplied trusses on patio covers and shop extensions need upgraded fastener patterns. Roof replacement in Oak Hills typically runs $8,000 to $20,000 depending on roof size and pitch. Call (877) 688-9930 for a roof assessment and line-item estimate.
We warranty our workmanship on every CGI cabinet installation in Oak Hills. Manufacturer warranty coverage on CGI hinges, glides, and finishes stays intact because we use OEM parts where replacement hardware is needed. We don’t state blanket warranty terms in online copy because they vary by project, so call (877) 688-9930 and we’ll put the specifics in writing for your scope.
Service Areas Near Oak Hills
Square One Builders serves Oak Hills and the surrounding High Desert and Inland Empire communities. If you’re a little down the hill, we cover Corona, Norco, Claremont, Montclair, and La Verne too. Our CGI service in Calimesa handles the foothill corridors, and for mountain clients we offer CGI service in Lake Arrowhead where wind and freeze-thaw cycles are even more aggressive. If you’re anywhere in the 92344 ZIP or within a short drive of Oak Hills, we’ll come out and take a look.
Book Your CGI Service in Oak Hills Today
Whether it’s a full kitchen remodel with CGI cabinets, a roof replacement built for High Desert wind, or a cabinet refacing on an older Oak Hills home, we’ll scope it, permit it, and build it. Start from square one, build it right.
Call (877) 688-9930 to schedule a free estimate. We’ll walk your property, check what the county will require, and give you a written, line-item scope. That’s how Square One Builders operates in Oak Hills.
Written by Brent Calloway, Owner & General Contractor at Square One Builders, serving Oak Hills and the surrounding High Desert communities.