CGI Construction in San Bernardino, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

CGI Construction in San Bernardino, CA | Square One Builders

If you’re searching for CGI construction service in San Bernardino, here’s the straight answer: we install, repair, and reface CGI cabinetry and countertops across the city’s flatland tract homes and foothill builds, and we’re an independent provider, not a CGI dealer or factory arm. We also offer CGI in Highland. The thing that separates our CGI work in San Bernardino is that we plan every cabinet and countertop install around the two very different housing realities here: mid-century homes on expansive clay that settle and rack, and fire-hardened foothill builds in 92404 and 92407 where Cal Fire’s Chapter 7A rules can shape even a simple kitchen refresh. Call (877) 688-9930 and we’ll tell you which CGI line fits your address before you spend a dollar.

Two construction workers walking toward a home renovation project with blueprints. in San Bernardino, CA

Call (877) 688-9930

Why San Bernardino Residents Choose Us for CGI Service

We’ve torn out enough failed CGI installs across 92404, 92410, and 92411 to know exactly where these cabinets and tops hold up, and where they need a little extra planning. Brent Calloway, our owner, came up doing ground-level remodel work across Southern California, and he runs every CGI job with the same habit: check the wall, check the floor, check the fire zone, then order material. That order matters in San Bernardino. A frameless CGI box that goes in square on a shimmed, sistered wall will give you decades; the same box hung on an out-of-plumb 1950s stud wall will rack at the hinges within a season. We match CGI’s OEM hinge, slide, and door-front specs wherever the box is sound, and we’ll say so plainly when a cabinet carcass is too far gone to save. For full-scope kitchen and bath remodels, we coordinate the cabinets, counters, plumbing, and electrical under one contract, so you’re not babysitting four trades.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Common CGI Construction Problems We Solve in San Bernardino

Here are the five CGI failures we see most often in San Bernardino, each tied to a local condition that actually causes it:

  • Thermofoil and laminate door skin peeling along the bottom rails. San Bernardino summers push past 100°F for weeks at a stretch, and a west-facing window turns a CGI thermofoil door into a slow cooker. The skin blisters and peels first at the bottom rail. We reface or replace with a melamine or painted door that tolerates dry heat better.
  • Frameless boxes racking at the hinges on settled framing. The flatland tract homes in 92410 and 92411 sit on expansive clay. Walls drift out of plumb over decades, and a full-overlay frameless CGI box has almost zero tolerance for that movement. Doors drift, reveals open up, and the hardware gets blamed when the wall was never right. We shim and sister to a true plane before setting boxes.
  • Particleboard and MDF toe kicks swelling from slab condensation. Older San Bernardino homes with uninsulated slabs pull moisture up through the concrete. A CGI particleboard carcass wicks that dampness and swells behind the dishwasher alcove and along the toe kick. We’ll replace the damaged run and install a moisture break where the slab is the culprit.
  • Quartz seams and sink cutouts cracking over settling footings. CGI quartz tops are rigid. When the cabinet plane underneath shifts, even an eighth of an inch, the seam or the sink cutout takes the stress. In San Bernardino’s mid-century flatlands, that shift is almost guaranteed over time. We level the cabinet plane before the top goes down, and we spec the seam placement to sit over support, not a void.
  • Fire-zone vent and eave requirements triggered by a kitchen bump-out. This one catches homeowners off guard. A small addition or bump-out in 92404 or 92407 can pull Chapter 7A ignition-resistant eave and vent detailing into the permit. If your CGI kitchen is part of an addition in the foothills, we plan that requirement into the scope from day one, not as a surprise change order later.

CGI Service in San Bernardino: What Local Conditions Mean for Your Equipment

San Bernardino’s foothill ZIPs 92404 and 92407 sit inside Cal Fire high-fire-severity zones, and that changes the permit conversation for any kitchen project that touches an exterior wall, adds an eave, or cuts a new vent penetration. A flatland remodel permit in 92410 or 92411 won’t mention Chapter 7A at all. A kitchen bump-out off Del Rosa Avenue in 92404 likely will. That means the scope isn’t just cabinets and counters. It’s ember-resistant vent screens, ignition-resistant eave detailing, and possibly a defensible-space review depending on the slope and vegetation. We plan for that on the front end because we’ve pulled permits in both worlds. It’s the same reason we look at the whole wall, not just the cabinet run. Start from square one, build it right.

CGI Models & Products We Service in San Bernardino

We work across the CGI lines most commonly sold through Southern California dealer showrooms: Euro-style frameless full-overlay cabinetry, thermofoil and melamine-finish door styles, plywood-box shaker and slab cabinet lines, and CGI quartz and laminate countertops. For parts, we match OEM hinge, slide, and door-front specs whenever the box is still structurally sound. Where OEM parts are discontinued or priced past reason, we step to quality aftermarket soft-close hardware and tell you exactly what we’re doing and why. We maintain a working stock of common CGI hinge and slide parts in our San Bernardino service vehicles, which keeps turnaround tight on repair calls without waiting on a dealer parts counter. For full CGI sales & service questions, our team specs the right line for the house it’s going into.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

CGI Service Pricing in San Bernardino

Pricing for CGI work in San Bernardino depends on the scope and the condition of the existing wall, but here are the line-item ranges we quote most often:

Service Typical Range
Cabinet Installation $4,000 – $13,000
Countertop Installation $2,000 – $6,500
Full Kitchen Remodeling $14,000 – $45,000
Kitchen Island Installation $3,000 – $10,000

What drives the cost: whether the existing framing needs to be corrected, whether fire-zone detailing enters the permit, the number of boxes and linear feet of top, and whether we’re doing a straight replacement or a full gut-and-reconfigure. A free estimate from us includes a wall and floor assessment, a parts and material spec, and a line-item written quote. We also handle CGI in Rialto. Call (877) 688-9930 for an exact number on your kitchen.

Two construction workers walking toward a home renovation project with blueprints. in San Bernardino, CA

Serving San Bernardino, CA — Our Local Coverage Area

We’re based in the San Bernardino area and know this community well, and we also offer CGI service in Muscoy. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.

FAQs – CGI Construction in San Bernardino

Service Areas Near San Bernardino

Our CGI service trucks cover San Bernardino and the surrounding foothill and valley communities. We regularly work in Corona, Montclair, Claremont, Norco, and La Verne. If you’re just outside the city line, reach out and we’ll confirm the schedule. For clients further south in the Inland Empire, see our San Bernardino service area page or our CGI service in Murrieta and CGI service in Romoland pages.

Book Your CGI Service in San Bernardino Today

If your CGI cabinets are peeling, racking, swelling, or you’re planning a full kitchen remodel in San Bernardino, call (877) 688-9930 and we’ll schedule a free estimate. We also provide CGI repair in Loma Linda. We’ll look at the walls, the fire zone, and the scope, then give you a written price that won’t shift once work starts.

Written by Brent Calloway, Owner at Square One Builders, serving San Bernardino and the Inland Empire since 2005.

Need Construction help in San Bernardino? Licensed & insured · Free on-site estimates response · free estimates
Call (877) 688-9930
Areas We Serve

Request a Free Estimate in San Bernardino

Tell us what you need — Square One Builders responds fast. No obligation.

When you submit this form, you acknowledge our Privacy Policy and consent to receive communications by telephone, text message, or email about your service request, including from the local pros who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch