Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Upland, CA | Square One Builders
We’re Square One Builders, an independent construction firm that works with CWS windows and door systems across Upland, from citrus-era bungalows near downtown to larger hillside homes off Euclid, and we also handle San Antonio Heights CWS service nearby. We’re not a CWS dealer and we’re not manufacturer-authorized – which means our recommendations come from job-site experience, not a sales quota. What makes our CWS work different in Upland is that we plan for the block-by-block realities of this city: tight citrus-era setbacks, mature root systems, and foothill sun that destroys poorly flashed window openings. Call (877) 688-9930 for a free estimate on CWS window replacement, impact installation, or a home addition built around them.

Why Upland Residents Choose Us for CWS Service
Brent Calloway, our owner and general contractor, learned framing and concrete the old way – through Golden West College’s Construction Technology program and then years of hauling material and reading blueprints until the work made sense. That background matters when we open a wall in a 1940s Upland home and find the original rough opening was never flashed. We don’t just swap the window and walk away. We rebuild the opening correctly, then install the CWS unit so it actually stays sealed through Upland’s hot summers and Santa Ana wind events.
Our team has specified and installed CWS Series 400 sliders, 3600 Series windows, and CWS patio door systems throughout the 91784, 91785, and 91786 ZIP codes. We’ve seen how these units age on southwest-facing walls and how older citrus-era framing fails around them. That local experience means we can give you a straight answer on repair versus replacement before we ever quote the job. See more about our CWS sales & service approach across Orange County and the Inland Empire.
Styles & brands we work with







Common CWS Construction Problems We Solve in Upland
- Vinyl frame and sash warping on southwest-facing windows. Upland’s intense foothill sun exposure, especially in the 91786 tract housing core where afternoon heat sits on front rooms, slowly deforms vinyl frames. Warped sashes cause seal failures and interior condensation that homeowners notice in winter. If the frame is sound, we re-glaze and reseal; if the vinyl has moved, replacement is the honest call.
- Fogged insulated glass units on 1990s-to-2000s CWS windows. Failed glazing seals are common on CWS-installed windows from that era, and Upland’s temperature swings between hot days and cool foothill nights accelerate the failure cycle. We source matched aftermarket IGUs where CWS glass is no longer available, and we pair the new glass with proper sealing so the replacement actually lasts.
- Weatherstripping and sash-track wear that lets Santa Ana dust in. High-wind events strip worn weatherstripping fast, and what’s left rattles in the track. You’ll see fine dust accumulating on window sills after every wind event. We replace the weatherstripping and rebuild the track, and we check the frame for wind-driven movement before we call it done.
- Rough-opening rot in citrus-era homes where flashing was never installed. We regularly open walls in 1920s-1950s Upland homes and find the original carpenter skipped flashing entirely. Decades of winter runoff and sprinkler overspray rots the sill plate and rough framing. This is a structural repair, not a window repair, and we handle both under one scope.
- Root intrusion from mature ficus and palm trees pushing on window sills and foundations. Upland’s historic downtown core is laced with narrow, deep lots planted with trees that were small in 1945 and are massive now. Roots heave sill plates and crack window openings. We cut back the intrusion, re-frame the opening, and re-flash before the new CWS unit goes in.
CWS Service in Upland: What Local Conditions Mean for Your Equipment
The citrus-era parcels along Upland’s historic downtown core are narrow and deep, and that shape dictates where windows and additions can go. On a 50-foot-wide lot, the side-yard setback is tight – usually five feet or less. When we replace CWS windows on those homes, we’re not just measuring the rough opening. We’re checking whether a mature ficus or palm root system has pushed the framing out of square, whether the sill plate has heaved, and whether the setback allows the window type you want without running afoul of current code. On one narrow lot near downtown, we opened a wall to replace aging CWS sliders and found the original 1940s rough framing had no flashing and a palm root had lifted the sill plate. Our crew re-framed the openings, cut back the root intrusion, flashed and sealed new CWS 3600 Series units, and matched the interior trim. A drop-in sash replacement would have failed within two years. That’s the difference between work planned for Upland’s actual parcel conditions and a generic window swap.
This block-by-block reality applies to our broader Upland work too – Upland service area coverage includes the 91784 hillside homes, the 91785 neighborhoods along Foothill, and the 91786 core, each with different soil, setback, and exposure patterns.
CWS Models & Products We Service in Upland
We work on the full CWS product range: Series 400 sliding vinyl windows, 3600 Series energy-efficient windows, CWS patio door systems in both sliding and French configurations, and Arcadia-style multi-slide custom window packages. For units where CWS still supports the series, we source OEM replacement sashes, glazing, and hardware. For discontinued lines, we specify matched aftermarket insulated glass units and balances that fit the existing frame. We stock common hardware and weatherstripping locally so most Upland service calls don’t wait on a parts shipment. The repair-or-replace decision is always made with the frame condition and rough opening in mind – never just the glass.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Upland
Window and door work in Upland runs on a wide range because some jobs are clean sash replacements and others involve re-framing a rotted citrus-era opening. Here’s where our pricing typically lands:
| Service | Typical Upland Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
What drives the cost: the condition of the rough opening, whether we’re matching existing interior trim, how many units are replaced at once, and whether you’re adding impact-rated glass for wind protection. Our free estimates include a written line-item quote tied to your actual parcel conditions. Call (877) 688-9930 to schedule yours.

Serving Upland, CA — Our Local Coverage Area
We’re based in the Upland area and know this community well, including CWS service in Claremont. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Upland
No, we’re an independent construction firm. We specify and install CWS products based on job-site experience across Upland’s mixed housing stock, not a manufacturer partnership. That independence means our repair-or-replace advice is based on what your frame and rough opening actually need, not what a dealer agreement pushes us to sell. Call (877) 688-9930 if you want an honest assessment of your existing CWS windows.
Yes, when they’re installed correctly. Vinyl windows perform well in Upland’s climate, but the weak point is almost always the flashing and sealing around the frame, not the CWS extrusion itself. If the rough opening is flashed properly and the window is anchored to code, it will handle the heat and wind fine. Most failures we see trace back to original installation shortcuts, especially in citrus-era homes built before flashing was standard practice.
Fogging between the panes means the insulated glass unit’s seal has failed. The desiccant inside the IGU is saturated, and moisture is condensing inside the air space. Upland’s wide temperature swings between hot foothill days and cool nights accelerate seal fatigue. The fix is a new IGU – not a whole window, unless the frame is also warped or the rough opening has rot. Call (877) 688-9930 to have us check whether you need glass only or a full replacement.
We treat it as a framing and drainage problem first, window problem second. The root has to be cut back and the sill plate re-leveled or re-framed before any new window goes in. Then we flash the opening correctly, install the CWS unit, and address the drainage path that led the root toward the foundation in the first place. We apply the same thorough approach to CWS repair in Montclair. It’s more work than a drop-in window swap, but skipping it means the new window fails within a few years. Estimates for this kind of job are free – call (877) 688-9930.
Yes. We install CWS windows and door systems in new home additions and ADU construction throughout Upland. Since we’re our General Contractor in Upland, we can handle the full scope – framing, grading, drainage, window installation, and finish work – under one contract. That matters on Upland’s narrow citrus-era lots where the window layout has to work around setback limits and root zones from day one. Call (877) 688-9930 to talk through your project.
Service Areas Near Upland
Beyond Upland proper, we serve CWS service in Rancho Cucamonga, CWS service in Jurupa Valley, Montclair, Claremont, and La Verne. Each of those communities has its own housing stock and parcel patterns, but the same principles apply: understand the local conditions, then do the work right.
Book Your CWS Service in Upland Today
If your CWS windows are fogged, warped, or leaking around the frame, don’t wait through another wind event. Call (877) 688-9930 to schedule a free estimate. We’ll assess your windows, your rough openings, and your specific Upland parcel – then give you a straight answer and a written quote.
Written by Brent Calloway, Owner & General Contractor at Square One Builders. Start from square one, build it right.