Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Construction in Irvine, CA | Square One Builders
Cambria quartz countertop installation in Irvine typically runs $2,000 – $6,500 depending on slab count, edge profile, and whether we’re tearing out original tile or laminate. We’re an independent construction firm serving all of Irvine with Cambria fabrication and installation, and the thing that separates our Cambria work here is simple: we know each village’s architectural review process before we ever template a kitchen. Call (877) 688-9930 for a free in-home estimate from Brent Calloway and our team.
Why Irvine Residents Choose Us for Cambria Service
We’ve templated and set Cambria quartz in Irvine kitchens long enough to know how Woodbridge townhomes settle differently than Great Park new construction. We’re not Cambria dealers and we’re not factory-authorized, but we specify their slabs regularly because Cambria’s non-porous quartz handles the dry heat and UV exposure Irvine dishes out better than most natural stone. Our team is fully licensed, insured, and bonded, and we handle the whole scope under one contract. Brent Calloway grew up in the Midway City pocket just off Bolsa Avenue, learned framing and finish work through Golden West College’s Construction Technology program, and has spent three decades on Orange County remodels. That time taught us something simple: the slab is rarely the problem. The cabinet plane underneath it usually is.
Styles & brands we work with
Common Cambria Construction Problems We Solve in Irvine
- Seam and edge failures over settled cabinets. Older Irvine tract homes settle. We regularly see Cambria seams telegraph open or slab corners rock because the original builder-grade cabinet boxes in Woodbridge and University Park were never re-shimmed after 30-plus years. We re-level the cabinet plane, re-set the slab, and the top stops moving.
- UV and heat-driven dulling on sun-facing runs. Irvine’s Santa Ana exposure is relentless, and kitchens with west- or south-facing sliders bake the countertop edge all afternoon. We’ve repaired and polished dulled Cambria runs in open-plan tract kitchens where the sun hits the island edge daily.
- Chip and fissure damage at sink and cooktop cutouts. Original 1980s and 90s installs across Woodbridge, University Park, and Northwood often had under-supported cutouts. We pull the top, reinforce the sub-top, router a clean pass, and re-set the slab so the weak point actually has structure under it.
- Staining and ring marks around sink flanges. Aging first-generation PVC plumbing in Irvine’s older tracts develops slow drips under the counter. The quartz itself doesn’t stain from that, but the seal joint and flange area collect gunk. We repair the surface and address the plumbing connection underneath.
- Island overhang flex in attached townhomes. Shared-wall construction in Irvine’s condo and townhome villages means island cabinets often sit on slabs that moved slightly. We install support rails and re-fur the cabinet top before the Cambria goes down, so the overhang doesn’t bounce.
Cambria Service in Irvine: What Local Conditions Mean for Your Countertop
Irvine is really two different Cambria realities, and the village you live in decides which one you’re dealing with. The 1970s and 80s villages like Woodbridge, University Park, and Turtle Rock are hitting full countertop-remodel age right now, which means we’re templating over cabinet runs that have been settling for four or five decades and were never perfectly square to begin with. On the other side of the city, Great Park and the newer Orchard Hills and Spectrum tracts are still under active builder warranty and Irvine Company architectural control, so even a simple countertop swap can require an HOA submittal and a warranty-compatible scope. A contractor who treats Irvine like any other OC suburb gets burned by this. We’ve been through enough architectural review packets in Woodbridge and Great Park to file the paperwork before install day, not after. Start from square one, build it right.
Here’s a real example. In a 1980s Woodbridge townhome off Springbrook, we pulled the original tile top and found the peninsula cabinets out of level by nearly a half inch and the shared-wall side bowed, so a straight Cambria Brittanicca run would have gapped at the seam. We re-furred and shimmed the cabinet box, added a support rail at the overhang, templated after the correction, and set two slabs with an epoxy seam that lands clear of the sink cutout. We filed the scope with the village architectural review before install. That’s what Cambria work in Irvine actually looks like.
Cambria Models & Products We Service in Irvine
We fabricate and install the Cambria model lines Irvine homeowners ask for most: Brittanicca and Brittanicca Gold for big island statements, Ella for kitchens that need contrast without busy veining, Torquay for the clean white look that pairs well with Irvine’s stucco-and-tile tract interiors, and Whitehall for bathrooms and laundry rooms where the slab needs to stay quiet. For anything visible, we use genuine Cambria slab. Under it, we use quality aftermarket sink clips, epoxy seam adhesive, and support rails. The failure is almost never the slab itself. It’s the cabinet plane and the cutout detailing. When a top is sound but the seam or edge is failing, we repair and re-set rather than sell a full replacement.
See the difference
Before
After
Before
After
Before
AfterCambria Service Pricing in Irvine
What you’ll pay for Cambria work in Irvine depends on how many slabs, which edge profile, whether we’re removing old tile or laminate, and how much cabinet correction the install requires. Older villages tend to need more leveling before the slab goes down, which is a line item we show you up front, not a surprise after demo. Here are the ranges we typically see for Cambria-specific work in Irvine:
| Service | Price Range |
|---|---|
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Backsplash Installation | $800 – $2,500 |
Every estimate is a written line-item quote, and it’s free. Call (877) 688-9930 and we’ll walk your kitchen, measure for Cambria, and give you numbers that hold.
Serving Irvine, CA — Our Local Coverage Area
We’re based in the Irvine area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Cambria Construction in Irvine
Yes, and we do it regularly. The shared wall itself doesn’t change the countertop work, but the village architectural review usually needs a submittal before the install date. We file that scope ourselves and time the template after any HOA comments come back, so the project doesn’t stall. Call (877) 688-9930 if you want us to check your village’s requirements first.
It can. If the builder warranty is still active, your architectural control is still with the Irvine Company or the builder, which means any kitchen change, including a countertop swap, may need written approval. We’ve done Cambria installs in Great Park homes under warranty and we coordinate the submittal so you don’t have to navigate it alone. Call (877) 688-9930 and we’ll tell you what your specific tract requires.
Usually yes, after we check the cabinet plane. Original 90s Irvine tract cabinets are often out of level by a quarter to a half inch, and Cambria won’t hide that. We re-shim and re-fur the boxes as part of the install, then template so the slab sits flat and the seams land clean. If the cabinet face framing is too compromised, we’ll tell you that before any slab is cut.
We address the edge profile first. A rounded or eased edge wears better under daily afternoon sun than a square polished edge, and we’ll spec that on west- and south-facing runs. For seams that have opened from heat expansion and settlement, we re-level the cabinet plane, re-set the slab, and use an epoxy color-matched to the Cambria pattern. Repair is almost always half the cost of replacement. Call (877) 688-9930 for an estimate on your specific run.
Plumbing changes like moving a sink generally require a permit in Irvine, and adding an island can trigger HOA architectural review depending on your village. We pull permits and handle the HOA submittal as part of the scope. It’s one contractor managing the whole thing, not three. Call (877) 688-9930 and we’ll walk you through what your specific village needs before you commit to anything.
Service Areas Near Irvine
Based in Irvine, we also serve homeowners in nearby Orange County communities and select Inland Empire cities. That includes Cambria service in La Habra for kitchens in that city’s 1950s and 60s ranch stock, Cambria service in Brea for the newer hillside tracts, and select work in Corona and the surrounding areas. If you’re outside Irvine, ask us about your specific neighborhood.
Book Your Cambria Service in Irvine Today
We’re scheduling Cambria estimates across all Irvine villages right now, including 92617, 92618, 92619, and 92620. Same-week estimates are available in most cases. Call (877) 688-9930 to book yours, or visit our Cambria sales & service page to see the full scope of what we handle. We’ll measure, quote, and give you straight answers.
Written by Brent Calloway, Owner & General Contractor at Square One Builders, serving Irvine service area since 2008.