Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Westminster, CA | Square One Builders
We install and repair Tremron hardscape across Westminster, from the tight postwar lots off Bolsa Avenue to the commercial frontage along Little Saigon’s retail spine, and we also provide Tremron in Garden Grove. We’re an independent installer, not authorized or sponsored by Tremron, which means we pick the paver system and base spec that actually fits your site instead of whatever a dealer program pushes. One of our Westminster jobs regularly outlasts the average because we fix what’s underneath the pavers, not just what’s on top. Call (877) 688-9930 for a free estimate.

Why Westminster Residents Choose Us for Tremron Service
Brent Calloway grew up in the Midway City pocket just off Bolsa Avenue and has been working on Westminster homes for the better part of three decades. That local history matters when you’re laying pavers over 60-year-old soil and old utility trenches. We know which blocks of Westminster hold up fine under a paver driveway and which ones have settled fill from decades of remodels and additions at the back of the lot.
We’ve installed enough Tremron Olde Towne, Mega-Bergerac, and Stonehurst pavers in Westminster to know how each line behaves under our specific conditions: mild coastal winters, Santa Ana dry gusts, and irrigation overspray from multigenerational backyard additions. We stock Tremron factory pavers and matching edge-restraint units locally, and we spec geotextile, base aggregate, and polymeric joint sand to the job rather than grabbing whatever’s cheapest at the supply yard. When the base is right, the paver stays put.
Being a full-scope general contractor also helps here. A Tremron driveway in Westminster often has to sequence around kitchen ventilation, grease-line trenching, or a second-story pop-top going in at the same time. We coordinate the hardscape with the rest of the project so you’re not juggling a paver crew and a plumbing inspector on the same day.
Styles & brands we work with







Common Tremron Construction Problems We Solve in Westminster
- Efflorescence and salt bloom on tumbled pavers. Westminster’s mild winter rain wets the paver surface, and then a Santa Ana event hits with hot, dry gusts that pull salts up through the face. It looks like white chalk streaked across the pavers. We remove the bloom, adjust the drainage or irrigation overspray that’s feeding it, and reseal where the pattern calls for it.
- Edge and joint sand loss along Bolsa Avenue frontage. Delivery trucks and pressure-washing along commercial driveways and patios push polymeric sand out of the joints, and pavers start to shimmy at the edges. We re-sand with a spec-grade polymer and replace damaged edge restraint so the field locks back together.
- Base settlement on 1950s – 60s lots. Most Westminster homes were built on original soil that was never compacted for paver loads, and old slab or utility trenches under rear yards and driveways settle differently than the surrounding ground. You’ll see ruts and lippage at the seams. We excavate the soft spots, re-grade for positive slope, and compact in lifts before relaying the pavers.
- Color fade and surface staining near commercial kitchens. Fats, cleaning chemicals, and grease-interceptor spills attack unsealed paver faces along Asian-format restaurant patios and side yards off Bolsa. If the drainage wasn’t graded away on day one, the pavers sit in the runoff. We correct the grade, treat the stain, and seal where the use calls for it.
- Heaved or shifted pavers after a second-story addition. When a Westminster ranch home gets a pop-top or rear addition, the new foundation and backfilled utility trenches settle at different rates than the old slab. Pavers laid years ago suddenly show a ridge. We match the existing Tremron pattern where possible and re-level the field rather than replacing everything.
Tremron Service in Westminster: What Local Conditions Mean for Your Equipment
Westminster’s Little Saigon business spine along Bolsa Avenue swaps tenants often, and that changes how paver work gets sequenced. A Tremron patio or driveway at an Asian-format restaurant or grocery is rarely a standalone hardscape job. It’s a tenant improvement tied to a grease interceptor and ventilation build-out, which means the hardscape has to be scheduled around utility trenching and city inspection rather than just curb appeal. Off Bolsa near the Little Saigon core, we reworked a driveway and rear patio for a multigenerational ranch home being expanded for an extended family as part of a Westminster Home Remodeling project. The old concrete had cracked over an uncompacted utility trench, so we excavated, re-graded with positive slope to the street, compacted the base in lifts, and laid Tremron Olde Towne pavers with matching edge restraint and polymeric sand. We sequenced the patio pour behind the new kitchen venting and grease-line trenching so the city inspection cleared the utilities before we set the final course. That’s the difference between Westminster and a master-planned tract in Fountain Valley: here, the paver work has to work around the city’s plumbing and zoning inspectors as much as the homeowner’s schedule.
Tremron Models & Products We Service in Westminster
We work across Tremron’s paver line, including Olde Towne for that tumbled, historic brick look, Mega-Bergerac and Bergerac for larger-format driveway and patio bands, and Stonehurst and Plaza Series pavers where the site calls for a cleaner modular face. We buy Tremron factory pavers and matching caps, and we keep the common Westminster sizes in local circulation so a repair isn’t waiting on a freight run from Florida. On the repair side, we use OEM-compatible edge restraint, geotextile, base aggregate, and polymeric joint sand. The paver is rarely what fails. The base underneath is what gives way, and we don’t substitute cheap fill where the load matters.
See the difference
Before
After
Before
After
Before
AfterTremron Service Pricing in Westminster
Pricing for Tremron work in Westminster depends on square footage, existing base conditions, access, and whether the job is a fresh install or a re-level and re-sand. The table below shows the range we typically see across Westminster’s postwar lots and Bolsa commercial frontage.
| Service | Typical Westminster Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
A free estimate includes site walk, base assessment, and a written line-item quote so you know exactly what you’re paying for before we start. If your pavers are sound but heaved or stripped of sand, we’ll tell you re-level and re-sand is the right call rather than selling a full tear-out. Call (877) 688-9930 to schedule yours.

Serving Westminster, CA — Our Local Coverage Area
We’re based in the Westminster area and know this community well, and we offer Tremron service in Huntington Beach too. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Tremron Construction in Westminster
You can walk on a new Tremron paver driveway in Westminster within a day of installation, but we ask that vehicles stay off for at least 48 to 72 hours so the base can settle evenly under its own weight. Polymeric joint sand needs about 24 hours of dry weather to cure properly, which is usually workable in our mild climate unless a winter rain front rolls through. We’ll give you a firm wait time on the day of install. Call (877) 688-9930 for a project-specific timeline.
No. We’re an independent installer who buys Tremron pavers at supply yards and installs them to spec. We’re not authorized, sponsored, or endorsed by Tremron, and we don’t claim to be. What that means for you is simple: we recommend the paver and base system that fits your Westminster lot, not whichever line a dealer program is pushing this quarter.
We use Tremron factory pavers and matching edge-restraint and cap units for any Tremron-branded job. For base materials and joint sand, we spec geotextile, aggregate, and polymeric sand to the engineering requirements of the site. The paver face is what you see. The base is what fails. We don’t cheap out on either.
We install and repair Olde Towne, Mega-Bergerac, Bergerac, Stonehurst, and Plaza Series pavers, plus the tumbled cobble-style collections Tremron puts out. If your Westminster driveway or patio uses a discontinued Tremron pattern, we’ll match it as closely as the current catalog allows and tell you up front where the match won’t be perfect.
A Tremron paver driveway in Westminster typically runs $7,000 to $18,000 depending on square footage, base work, and access. Tight postwar lots with old utility trenches usually push toward the upper end because the base has to be corrected first. Call (877) 688-9930 for a free estimate with line-item pricing.
Service Areas Near Westminster
We serve Westminster and the surrounding Orange County communities, including Midway City, Stanton, Garden Grove, Fountain Valley, and Huntington Beach. If you’re a few blocks over the city line, we’ll still come take a look. Tremron service in Midway City and Tremron service in Stanton are both active routes for our crew. See our Westminster service area page or our Tremron sales & service overview for more on what we cover.
Book Your Tremron Service in Westminster Today
If your Tremron pavers are shifting, stained, or the base is giving way, call Square One Builders at (877) 688-9930. We’ll walk the site, tell you honestly whether you need a re-level or a rebuild, and give you a written quote before any work starts. Start from square one, build it right.
Written by Brent Calloway, Owner & General Contractor at Square One Builders, serving Westminster and Orange County for three decades.