Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Cypress, CA | Square One Builders
We provide independent CWS kitchen cabinet and countertop service across Cypress, handling everything from sagging soft-close hinges and swollen MDF sink bases to cracked quartz seams. What makes our CWS work different here: we know Cypress’s 1950s-70s tract-era homes sit on slab-on-grade foundations, and we’ve spent years watching how those slabs shift and transmit moisture into cabinet runs. We’re not manufacturer-affiliated or authorized, which means our recommendations are driven by what’s actually best for your kitchen, not a warranty obligation. Call (877) 688-9930 any time to talk through what you’re seeing.
Why Cypress Residents Choose Us for CWS Service
Most of the kitchens we see in Cypress were built between 1955 and 1975, and a good number of them still have their original CWS framed cabinet lines, or CWS boxes that were installed during remodels in the 1990s and 2000s. We’ve rebuilt enough of these to know exactly where the hardware fails, how the plywood and MDF boxes age, and what holds up versus what needs full replacement.
Brent Calloway grew up in the Midway City pocket just off Bolsa Avenue, and he’s spent nearly three decades working on homes throughout Orange County. That means when we walk into a Cypress kitchen and see an island that’s drifted out of level, we already suspect the slab moved. We match OEM CWS hinges, drawer glides, and cabinet hardware when the boxes are still sound, and we’re direct with homeowners when a reface makes no sense. One contractor, every system. That’s how we keep your remodel fully managed, from cabinet tear-out to new quartz installation — and why clients also trust our General Contractor in Cypress for complete project oversight.
Styles & brands we work with
Common CWS Construction Problems We Solve in Cypress
- Soft-close hinges and undermount drawer glides that sag or stop latching. After a decade of daily use in Cypress tract kitchens, the original CWS glides lose their spring and the soft-close feature stops catching. We see this most often where cabinet boxes were shimmed off-level against a slab-on-grade floor, which loads one hinge and one glide bank unevenly. We replace with OEM-matched hardware where possible, or move to a quality aftermarket glide when the old mounting points are wallowed out.
- MDF-core cabinet boxes that swell and delaminate at the sink base and dishwasher bay. This is the single most common CWS failure in older Cypress homes. MDF wicks moisture from slow sink drips, dishwasher steam, and condensation on uninsulated slab edges, and once it swells, the box loses structural bite. We replace those boxes with plywood-core construction rather than patching MDF that will fail again.
- Toe-kick and cabinet bases that rot or pull loose where the slab settled. Sections of 1960s Cypress slab foundations have settled unevenly over time, and the cabinet bases installed on those floors followed. When a CWS toe-kick pulls free or the base shows moisture staining from the slab below, we re-level the run and install properly sealed kick plates before resetting the cabinets.
- Quartz and granite countertops cracking at unsupported seams over older CWS cabinet runs. A countertop is only as good as the boxes under it. When a Cypress kitchen was updated with new CWS quartz tops but the old cabinet boxes were never re-squared, we see hairline cracks open right at the seam. We re-level and re-square the cabinets, then reset the stone on fresh seams so the load path is clean.
- Full tear-out confusion when only part of the run failed. Not every problem means replacing everything. We tell Cypress owners plainly when a section of CWS cabinetry can be rebuilt and when the whole run needs to go. Starting from square one doesn’t mean throwing away solid boxes if the failure is isolated.
CWS Service in Cypress: What Local Conditions Mean for Your Equipment
Here’s what most people don’t know about remodeling in Cypress: the city is nearly built out, which means its plan check scrutinizes ADU and second-story height and setback compliance harder than neighboring Orange County cities. That has a direct effect on cabinets. If a kitchen or bath remodel touches a wall, opens a layout, or shifts plumbing, you can trigger a setback review that reshapes the design before CWS cabinets ever get ordered. We’ve seen projects on compact tract blocks off Holder Street and Orange Avenue where a planned eight-foot island run had to shrink to six and a half feet because the wall move pushed the kitchen into a side-yard setback. Knowing that upfront changes how we lay out cabinet runs, where we put the seams in a quartz top, and when we bring in a structural engineer. In a slab-on-grade 1960s Cypress home, the plumbing is embedded in the floor, so any sink relocation means cutting concrete. We plan for that from the first walkthrough. If you’re working with CWS cabinets, that means we order the boxes only after the plan check path is clear, not before. Start from square one, build it right.
CWS Models & Products We Service in Cypress
We work on CWS framed and frameless kitchen cabinet lines, including the all-plywood and MDF-core box construction that was popular across different eras of Cypress remodels. We service CWS soft-close hinge systems and undermount drawer glides, and we have a working stock of OEM-matched replacements for common hinge overlays and glide lengths. For countertops, we handle CWS quartz and granite programs, including seam repair, re-leveling, and full replacement. When a box has failed beyond repair, we spec aftermarket plywood-core boxes and match the face profile and finish as closely as the existing run allows. We’re honest with Cypress owners about where that match will be invisible and where it will show.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Cypress
The final number depends on the scope: a single sink base replacement on a Cypress tract kitchen is a small job, while a full CWS cabinet tear-out and new quartz install is a real remodel. Here are the line-item ranges we work within for Cypress kitchens:
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the cost is whether we’re repairing existing CWS boxes, refacing them, or replacing the entire run, plus the condition of the slab underneath. A free estimate means we walk the kitchen, check the level of the boxes, look at the seams, and give you a written line-item quote so you know exactly what’s salvageable and what’s not. Call (877) 688-9930 to schedule that walkthrough.
Serving Cypress, CA — Our Local Coverage Area
We’re based in the Cypress area and know this community well, with nearby coverage including CWS service in Buena Park. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Cypress
The honest answer depends on the boxes themselves. If the MDF cores are dry, square, and the hardware mounting points are still solid, a reface with fresh doors, drawer fronts, and matching veneer can last another 15 to 20 years. If there’s swelling at the sink base, signs of slab moisture wicking up through the toe-kick, or the boxes have drifted out of level with the settled floor, refacing is wasted money. We’ll tell you which one you’re looking at before we quote anything. Call (877) 688-9930 and we’ll look at the actual boxes, not photos.
Yes, often. Cypress is nearly built out, and its plan check is known for scrutinizing ADU and second-story height and setback compliance more strictly than nearby cities. A kitchen remodel that moves or removes a wall, shifts plumbing, or changes the structural layout can trigger a setback review even if you’re not adding square footage. That review can change your cabinet layout before you order. We handle this by confirming the plan check path before committing to a CWS cabinet order. Call (877) 688-9930 to talk through your specific lot.
We start by pulling the old tops and checking the cabinet boxes underneath. A cracked seam usually means the cabinets shifted or were never re-squared. On a recent kitchen remodel off a compact Cypress tract block — similar to projects we handle with our Garden Grove CWS service — we pulled a CWS framed run whose MDF sink base had swollen and delaminated under a cracked quartz top, while the adjacent boxes were still solid. We re-squared the layout, replaced the sink base and a sagging glide bank with plywood-core boxes and OEM-matched soft-close hardware, then reset a new quartz top on fresh seams. The homeowner kept the majority of the run and got a level countertop for about a third of a full replacement. Exact costs vary by scope, so call (877) 688-9930 for a free estimate.
Both. Where the box is sound and the original CWS hinge or glide mounting points are intact, we match OEM hardware so the feel and function stay consistent. Where the mounting points are worn, the hinge cup is blown out, or the glide has bent from years of uneven load, we switch to a quality aftermarket soft-close option and re-drill for clean engagement. We don’t mix mismatched hardware across a run without telling you first. For an exact recommendation on your Cypress kitchen, call (877) 688-9930.
That depends entirely on whether you’re repairing, refacing, or replacing. A small CWS cabinet repair or countertop seam fix in Cypress can start in the low thousands. A full kitchen remodel with new CWS cabinets, quartz tops, backsplash, and island typically runs $14,000 to $45,000 in this market, comparable to our CWS in Stanton pricing. A bathroom vanity and surround update stays closer to $5,000 to $12,000. Call (877) 688-9930 for a written line-item quote, and you’ll see exact numbers for your scope before anything gets ordered.
Service Areas Near Cypress
We take CWS service calls in Cypress and throughout the surrounding Orange County and western Riverside areas. If you’re in CWS service in Fountain Valley, CWS service in La Palma, Buena Park, Los Alamitos, or Garden Grove, the same crew and the same CWS parts inventory apply. We’re also well set up for jobs in Corona, La Verne, and the surrounding communities. And you can always check our broader Cypress service area page or CWS sales & service hub for full coverage details.
Book Your CWS Service in Cypress Today
If your CWS cabinets are sagging, swelling, or sitting under cracked stone, call (877) 688-9930 to schedule a free estimate. We’ll walk the kitchen, check the slab, open the sink base, and give you a straight answer on what your CWS run needs. From the ground up, we’ll make sure it’s built to stay that way.
Written by Brent Calloway, Owner at Square One Builders, serving Cypress since our first tract remodel there years ago.